Kestrel 3000 Pocket Weather Meter
- The Kestrel 3000 is the ONLY hand-held instrument for measuring wind speed, temperature, wind chill, relative humidity, heat index and dew point temperature.
- Pocket-sized and easy-to-use.
- Measuring modes and display units can be changed at any time.
- The large liquid crystal display is easy to read, even in low light.
- The Kestrel 3000 measures wind speed with a large-diameter precision ultralight impeller which turns on sapphire bearings.
- The impeller and protective housing pop out without tools for easy and inexpensive replacement.
- The Kestrel uses an external thermistor for fast response and accuracy to ± 1.0°C.
- The capacitive humidity sensor is factory calibrated to ± 3% accuracy and can be recalibrated in the field with our Relative Humidity Calibration Kit.
- A hard slip-on case protects the Kestrel 3000 display, buttons and impeller from damage.
- The Kestrel 3000 is covered by a full one-year warranty and is also protected by US patent No. 5,753,784.
Wind Speed Functions
Operating Modes: Moving 3-second average (), maximum 3-second gust since power on (MAX) or average since power on (AVG).Display Update: 1 second.
Units: Knots (KT), metres per second (M/S), kilometres per hour (KM/H), miles per hour (MPH), feet per minute (FPM) and Beaufort force (B).
On-Axis Accuracy: greater of ± 3% or ± least significant digit.
Off-Axis Response: -1% @ 5°, -2% @ 10°, -3% @ 15°.
Resolution and Range: KT, M/S, KM/H or MPH: resolution 0.1; max display range 199.9.
FPM: resolution 1.0 below 1,999, 10 above 2,000(auto-ranging); max display range 19,990.
Calibration Drift: < 2% after 100 hours use at 7 M/S (~14 KT, 25 KM/H, 16 MPH or 1,400 FPM).
Minimum - Maximum Speed: 0.3 M/S (~0.6 KT, 1 KM/H, 0.7 MPH or 60 FPM) to 40 M/S (~78 KT, 144 KM/H, 89 MPH or 7,830 FPM).
Temperature and Wind Chill Functions
Operating Modes: Temperature; wind chill; relative humidity; heat index; dew point temperature.Units: Degrees Centigrade (°C) or degrees Fahrenheit (°F).
Accuracy: Temperature and wind chill, ± 1.0°C; relative humidity ± 3%; dew point temperature, ±2°C; heat index, ±3°C. Humidity sensor can be recalibrated in the field.
Temperature/Wind Chill Display Update: 1 second.
Humidity Sensor Response Time: 1 minute.
Resolution: 0.1.
Environmental Specifications
Environmental Sealing: Electronics enclosure IP67 - water resistant to 1 m. (3 ft.). Floats.Shock: Drop tested to 2 m. (6 ft.).
Operating Temperature: LCD readability is lost above 50°C (122°F) and below -15°C (5°F). Accurate readings may be taken beyond these temperature limits by exposing the unit for the minimum time necessary to take and record measurement.
Storage Temperature: Recommended -20°C to 80°C (-4°F to 176°F).
Physical Buttons: Two sealed tactile rubber buttons control all functions.
Other Functions
Auto Shutdown: 30 minutes after last key press.Battery: User-replaceable CR2032 coin cell. Typical life, 400 hrs.
Physical Specifications
Impeller: 25 mm (1 in.) diameter, sapphire bearings, light weight. User-replaceable without tools.Temperature Sensor: Hermetically sealed precision thermistor.
Humidity Sensor: Silicon based capacitive sensor.
Display: Reflective 3 1/2 digit LCD, 9 mm (0.36 in.) digit height.
Case: Slip-on hard case.
Dimensions: 122 x 42 x 14 mm (4.8 x 1.7 x 0.6 in.); case, 117 x 46 x 19 mm (4.6 x 1.8 x 0.7 in.); lanyard, 0.5 m. (10 in.).
Weight: Unit, 44 g. (1.6 oz.); case, 23 g. (0.8 oz.).

Social
Follow us: